Frame cramp (supplied in stainless or galvanised steel) for restraining masonry to new or existing structures and for building in non-structural elements (frames etc).

Frame cramp supplied with a drip to prevent moisture crossing the cavity. Drip position 90mm from safety end as standard.

As VE7, but supplied with a slot in upstand to allow various fixings.

A VS7 but supplied with a drip to prevent moisture from crossing the cavity. Drip positioned 90mm from safety end as standard.

Frame cramp with 3 x 6.5mm holes in the projection for a dowel bar. Used to restrain stone cladding and coping stones. Dowels supplied

Welded wire frame cramp for all applications, as the VE7, with added flexibility provided by a wire projection.

Clasp tie, fixed to the side of a stanchion and used to restrain brickwork.

Wire clasp tie, fixed to the side of stanchion but also allowing extra movement with the flex of the wire section.

A simple and cost effective product for restraining masonry back to ‘H’ section stanchions, providing four different slots to suit differing flange thicknesses.