A range of wall tie products specifically designed to secure wall skins and framework together to provide structural integrity through various forms of movement and force. A wide-ranging choice of ties and fixings has been developed to provide the maximum performance for any combination of materials used on a project.
An expanded metal mesh available in various widths, stainless or galvanised steel. Designed to be incorporated into masonry for crack control.
Vista have now developed Vista Weld 3 to meet the ever increasing requirements of specifiers. Vista Weld 3 is a welded ladder type Bed Joint Reinforcement with 3mm outer wires, generally used as a structural product, also ideal for crack control. Available in Stainless Steel Grade 304 S15 and in numerous widths to suit any brick and block thickness. Vista Masonry Reinforcement conforms to BS 5628 : Part 2 2000. Also available in galvanised.
View productVista have developed Vista Weld to meet the ever increasing requirements of specifiers. Now available in two types Vista Weld is a welded ladder type Bed Joint Reinforcement with 3.6mm outer wires, generally used as a structural product, also ideal for crack control. Available in Stainless Steel Grade 304 S15 and in numerous widths to suit any brick and block thickness. Vista Masonry Reinforcement conforms to BS 5628 : Part 2 2000. Also available in galvanised.
Vista have developed Vista Weld 5 to meet the ever increasing requirements of specifiers. Vista Weld 5 is a welded ladder type Bed Joint Reinforcement with 5mm flattened outer wires, generally used as a structural product, also ideal for crack control. Available in Stainless Steel Grade 304 S15 and in numerous widths to suit any brick and block thickness. Vista Masonry Reinforcement conforms to BS 5628 : Part 2 2000. Also available in galvanised.
View productVista Tie Span Type 1 has been designed for use in double-leaf collar joint walls, and can reduce the problems on site with heavy blocks, using 2 x 100mm blocks tied together with Tiespan type 1 to replace a 215mm block. This method of construction also gives the wall a 6 hour fire rating. Tiespan type 1 is manufactured from stainless or galvanised steel with 4mm or 3.5mm main longitudinal wires with 20mm flat cross ties. Each length is 2700mm long x 175mm wide.
View productDouble Vista Weld is a welded structural ladder type masonry reinforcement used to reinforce both leaves of a cavity wall. Manufactured in Stainless Steel Grade 304 S15 Double Vista Weld is manufactured with 3.5mm main longitudinal wires with 3.6mm cross wires (with a drip). Each length is 2700mm long and is available in numerous widths to suit individual design requirements.
These products allow the introduction of a cavity tie into a situation where no ties are present Stainless Steel ‘wavy’ tail ties used for remedial applications and available in lengths of 150 – 300mm. Designed for use in conjunction with Vista resins.
Remedial ties are used where existing cavity walls ties have had wall ties omitted, or where the wall ties have corroded and no longer perform their original function.Full installation instructions available on request.
The Vista Stainless Steel Wall Starter System joins new walls to existing masonry. Suitable for both internal and external brick or block walls, the connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick. The pack contains the fixings necessary for a single leaf wall up to 2.4m / 8’ 2 no. Wall connectors 1.2m long, stainless steel 5 no. Plugs, coach screws and washers 10no. Wall connector ties, stainless steel Packed in boxes of 10
View product