A range of wall tie products specifically designed to secure wall skins and framework together to provide structural integrity through various forms of movement and force. A wide-ranging choice of ties and fixings has been developed to provide the maximum performance for any combination of materials used on a project.
As a result of problems experienced over wider cavities (150mm to 300mm) and their weight causing long ties to overturn, the Vista two part tie allows larger cavities to be spanned, (up to BS EN 845 – 1 standard for a type 2 tie). The shorter section is built into the inner leaf as construction proceeds, whilst the longer section is locked into the inner section and built into the outer leaf as it lifts. Tested as Type B (sound) Tested as Type 2 (strength) to BS EN 845-1
View productUsed over a movement joint in a run of brickwork or blockwork with safety embedment detail or plain end (B20). (Sleeve supplied as extra).
Used for restraining masonry to steelwork whilst allowing lateral movement. (Sleeve supplied as extra).
View productThis product allows lateral movement between masonry and a fixed channel or slot. (Sleeve supplied as extra).
View productUsed for side fixing a steel column to masonry whilst allowing lateral movement. (Sleeve supplied as extra).
View productDebonding sleeve to allow for movement of the ties listed above (a 25mm wide sleeve is required for channel ties). Debonding sleeves should have a 10mm gap left at end to allow for movement once installed.
Frame cramp (supplied in stainless or galvanised steel) for restraining masonry to new or existing structures and for building in non-structural elements (frames etc).See fixing section for details on fixing methods.
View productFrame cramp supplied with a drip to prevent moisture crossing the cavity. Drip position 90mm from safety end as standard.
As VE7, but supplied with a slot in upstand to allow various fixings.
View product