A range of wall tie products specifically designed to secure wall skins and framework together to provide structural integrity through various forms of movement and force. A wide-ranging choice of ties and fixings has been developed to provide the maximum performance for any combination of materials used on a project.
Multidrip feature to prevent moisture travelling across the cavity. The design means that the tie can be installed either way up. Tested as Type A (sound) Tested as Type 4 (strength) to BS EN 845-1
View productMultidrip feature to prevent moisture travelling across the cavity. The design means that the wall tie can be installed either way up. Tested as Type B (sound). Tested as Type 2 (strength) to BS EN 845-1
View productMultidrip feature to prevent moisture travelling across the cavity. Design means the tie can be installed either way up. Tested as Type B (sound) Tested as Type 2 (strength) to BS EN 845-1
View productNEUTRAS wall ties have both low thermal conductivity and high structural performance levels. This means they can be excluded from the current U value calculations in EN ISO 6946 and provide a credible solution to new legislation requirements. Available as Type 4 (Housing Tie) Type 2 (General Purpose Tie) and Type 1 (Heavy Duty Tie)
View productConstant drip feature to prevent moisture travelling across cavity. Tested as Type B (sound) Tested as Type 1 (strength) to BS EN 845-1
View productVertical twist feature to prevent moisture travelling across the cavity. Tested as Type B (sound) Tested as Type 1 (strength) to BS EN 845-1
View productUsed in full fill cavities or where the prevention of moisture travelling across the cavity is not an issue. Also for collar jointed walls. Tested as Type B (sound) Tested as Type 1 (strength) to BS EN 845-1
View productDrip feature to prevent moisture travelling across the cavity (taking less space than vertical twist). Tested as Type B (sound) Tested as Type 1 (strength) to BS EN 845-1. Drip position 90mm from safety end as standard.
View productTraditional Double Triangle wall tie previously to BS1243. Multidrip feature to prevent moisture travelling across the cavity. Design means the tie can be installed either way up. Tested as Type B (sound) Tested as Type 2 & 3* (strength) to BS EN 845-1
View productAs a result of problems experienced over wider cavities (150mm to 300mm) and their weight causing long ties to overturn, the Vista two part tie allows larger cavities to be spanned, (up to BS EN 845 – 1 standard for a type 2 tie). The shorter section is built into the inner leaf as construction proceeds, whilst the longer section is locked into the inner section and built into the outer leaf as it lifts. Tested as Type B (sound) Tested as Type 2 (strength) to BS EN 845-1
View productUsed over a movement joint in a run of brickwork or blockwork with safety embedment detail or plain end (B20). (Sleeve supplied as extra).
Used for restraining masonry to steelwork whilst allowing lateral movement. (Sleeve supplied as extra).
View productThis product allows lateral movement between masonry and a fixed channel or slot. (Sleeve supplied as extra).
View productUsed for side fixing a steel column to masonry whilst allowing lateral movement. (Sleeve supplied as extra).
View productDebonding sleeve to allow for movement of the ties listed above (a 25mm wide sleeve is required for channel ties). Debonding sleeves should have a 10mm gap left at end to allow for movement once installed.
Frame cramp (supplied in stainless or galvanised steel) for restraining masonry to new or existing structures and for building in non-structural elements (frames etc).See fixing section for details on fixing methods.
View productFrame cramp supplied with a drip to prevent moisture crossing the cavity. Drip position 90mm from safety end as standard.
As VE7, but supplied with a slot in upstand to allow various fixings.
View productA VS7 but supplied with a drip to prevent moisture from crossing the cavity. Drip positioned 90mm from safety end as standard.
View productFrame cramp with 3 x 6.5mm holes in the projection for a dowel bar. Used to restrain stone cladding and coping stones. Dowels supplied separately.
View productWelded wire frame cramp for all applications, as the VE7, with added flexibility provided by a wire projection.
View productClasp tie, fixed to the side of a stanchion and used to restrain brickwork.
View productWire clasp tie, fixed to the side of stanchion but also allowing extra movement with the flex of the wire section.
A simple and cost effective product for restraining masonry back to ‘H’ section stanchions, providing four different slots to suit differing flange thicknesses.
The VIR head restraint is designed to resist lateral movement in wall heads, restraining them to structurel soffits whilst allowing vertical movement (in order, for instance, to accommodate beam deflection).
The VHR is a very simple, economical head restraint product. Twice holed to accommodate 100 or 140mm walls. Vertical movement can be accommodated only by allowing clearance between the top of the blockwork panel and the underside of the restraint angle. Can also be manufactured to fit 215mm blockwork.
View productSoffit fixed both sides where fixings can be made directly above. Heavy Duty.
View productSoffit fixed both sides where fixings can be made directly above. Heavy Duty.
View productFixed to the side of structure and offset to drop down centre of cavity. Heavy Duty.
View productUsed as a soffit fixed head restraint. Light Duty, fixed in line with cavity below.
Used as a soffit fixed head restraint. Light Duty, twisted head allows for fixing a right angle to cavity.
Used as a side fixed head restraint. Light Duty, and stepped to bring into centre of cavity.
Sliding one way ties used in conjunction with the sliding anchor stems. This tie only ‘catches’ either the inner or the outer wall. Sizes are measured from the centre of the slot.
Sliding two way ties used in conjunction with the sliding anchor stems. This tie ‘catches’ both the inner or the outer wall. Sizes are measured as the overall length of the tie.
Stainless Steel masonry-timber tie for 50-100mm cavities in up to 4 storey timber frame buildings. Accommodates vertical movement. Tested as type B (sound). Tested as type 6 (strength) to BS EN 845-1.
Supplied complete with 50mm x 3.35mm Stainless Steel Annular Ring Nails. Also available with 50mm x 4.0mm Stainless Steel Screws for SIPS panels.
View productAn expanded metal mesh available in various widths, stainless or galvanised steel. Designed to be incorporated into masonry for crack control.
Vista have now developed Vista Weld 3 to meet the ever increasing requirements of specifiers. Vista Weld 3 is a welded ladder type Bed Joint Reinforcement with 3mm outer wires, generally used as a structural product, also ideal for crack control. Available in Stainless Steel Grade 304 S15 and in numerous widths to suit any brick and block thickness. Vista Masonry Reinforcement conforms to BS 5628 : Part 2 2000. Also available in galvanised.
View productVista have developed Vista Weld to meet the ever increasing requirements of specifiers. Now available in two types Vista Weld is a welded ladder type Bed Joint Reinforcement with 3.6mm outer wires, generally used as a structural product, also ideal for crack control. Available in Stainless Steel Grade 304 S15 and in numerous widths to suit any brick and block thickness. Vista Masonry Reinforcement conforms to BS 5628 : Part 2 2000. Also available in galvanised.
Vista have developed Vista Weld 5 to meet the ever increasing requirements of specifiers. Vista Weld 5 is a welded ladder type Bed Joint Reinforcement with 5mm flattened outer wires, generally used as a structural product, also ideal for crack control. Available in Stainless Steel Grade 304 S15 and in numerous widths to suit any brick and block thickness. Vista Masonry Reinforcement conforms to BS 5628 : Part 2 2000. Also available in galvanised.
View productVista Tie Span Type 1 has been designed for use in double-leaf collar joint walls, and can reduce the problems on site with heavy blocks, using 2 x 100mm blocks tied together with Tiespan type 1 to replace a 215mm block. This method of construction also gives the wall a 6 hour fire rating. Tiespan type 1 is manufactured from stainless or galvanised steel with 4mm or 3.5mm main longitudinal wires with 20mm flat cross ties. Each length is 2700mm long x 175mm wide.
View productDouble Vista Weld is a welded structural ladder type masonry reinforcement used to reinforce both leaves of a cavity wall. Manufactured in Stainless Steel Grade 304 S15 Double Vista Weld is manufactured with 3.5mm main longitudinal wires with 3.6mm cross wires (with a drip). Each length is 2700mm long and is available in numerous widths to suit individual design requirements.
These products allow the introduction of a cavity tie into a situation where no ties are present Stainless Steel ‘wavy’ tail ties used for remedial applications and available in lengths of 150 – 300mm. Designed for use in conjunction with Vista resins.
Remedial ties are used where existing cavity walls ties have had wall ties omitted, or where the wall ties have corroded and no longer perform their original function.Full installation instructions available on request.
The Vista Stainless Steel Wall Starter System joins new walls to existing masonry. Suitable for both internal and external brick or block walls, the connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick. The pack contains the fixings necessary for a single leaf wall up to 2.4m / 8’ 2 no. Wall connectors 1.2m long, stainless steel 5 no. Plugs, coach screws and washers 10no. Wall connector ties, stainless steel Packed in boxes of 10
View productSST Starter Tie supplied complete with nylon plug. Used where new walls are being built directly from existing brickwork. Alternatively can be used without plug and screwed directly into timber door or window frames.
SSFT Starter Frame Tie. Used for fixing timber door and window frames to brickwork by building into mortar courses as construction progresses.
SST Starter Tie supplied complete with nylon plug. Used where there is a cavity and a new wall needs to be built. Supplied with drip.
A range of ties and fixings offering solutions for new build, thin joint walling, roof fixing, crack stitching and other remedial work, and in situations where there may be irregular coursing of brickwork to blockwork . As well as the helical ties and bars the range includes fixing tools, both hand and power tool adaptors, grouts and grout guns, in fact everything needed for correct and successful fixing of the products. Tie and batten fixings. Sizes 6mm and 8mm diameter, lengths from 100mm up to 300mm. Helical Bar sizes 3mm, 4.5mm,6mm,8mm and 10mm. Packing Wall ties and Batten fixings in 100’s, Helical Bar supplied in individual lengths of 3m, 1.5m, 1m and 500mm.
View productUniversal insulation retaining clip used to hold insulation material against the inner wall of a cavity.
Universal insulation clip made using less plastic for reduced environmental impact.
View productThe setting tool is used in conjunction with REM ties. The tool is located over the brass ‘torque’ nut and tightened for the product to work correctly.