Button image: Home Page Button image: Contact Us
Button image: Wall Ties Button image: Masonry Restraint Button image: Masonry Support Button image: Windposts Button image: Parapet Posts Button image: Lintels Button image: Channels Button image: Fixings Button image: Sockets
Design Considerations button image
GAW1 Windposts Button Image
GAW1 Windpost Properties Button Image
GAW2 Windpost Button Image
GAW2 Windpost Properties Button Image

 

GA Fixings
Unit 34
Claycliffe Business Park
Cannon Way
Barugh Green
Barnsley
S75 1JU

Tel: 01226 380779
Fax: 01226 385558

Email: info@gafixings.com

GAW2 Windposts

  
The GAW2 range of windposts are of channel section where the post sits in the cavity of the wall, they are generally used for lighter load conditions than the GAW1 type posts.

The use of a GAW2 windpost is governed by the size of the cavity and the load to be supported ie it may not be possible to increase the section of the post and therefore its load capacity due to the size of the cavity.
Minimum Channel Sections
T (mm) "A" "B"
4
35
20
5
35
25
6
40
35
8
55
50
10
90
80
12
90
80

GAWT1
One-way windpost tie. Projection ‘P’ from front of notch required when ordering.
Service

G.A. undertake the design of the windpost and fixings required and will produce all necessary drawings detailing the windpost length and connections for approval prior to manufacture.

  
Home | Wall Ties 1 | Wall Ties 2 | Masonry Support | Windposts | Parapet Posts | Lintels | Channels | Fixings | Sockets | Contact Us
© Copyright GA Fixings 2006