Button image: Home Page Button image: Contact Us
Button image: Wall Ties Button image: Masonry Restraint Button image: Masonry Support Button image: Windposts Button image: Parapet Posts Button image: Lintels Button image: Channels Button image: Fixings Button image: Sockets
Design Considerations button image
GAW1 Windposts Button Image
GAW1 Windpost Properties Button Image
GAW2 Windpost Button Image
GAW2 Windpost Properties Button Image

 

GA Fixings
Unit 34
Claycliffe Business Park
Cannon Way
Barugh Green
Barnsley
S75 1JU

Tel: 01226 380779
Fax: 01226 385558

Email: info@gafixings.com

GAW1 Windposts

 
The GAW1 range of windposts are of angle section where the inner leg ‘A’ of the post is built into the inner leaf with the return leg ‘B’ sitting in the cavity.

GAW1 windposts are generally used for heavily loaded conditions or for small cavities where the GAW2 type post may not fit.

GAWT1
One-way windpost tie usually only required when the GAW1 is being used at a movement joint location or at an opening. Not supplied as standard please specify if required when ordering.
GAWT2
Two-way windpost ties usually supplied 150mm long. The ties can be supplied with a debonding sleeve for windposts being used at movement joint locations.
Service

G.A. undertake the design of the windpost and fixings required and will produce all necessary drawings detailing the windpost length and connections for approval prior to manufacture.
Home | Wall Ties 1 | Wall Ties 2 | Masonry Support | Windposts | Parapet Posts | Lintels | Channels | Fixings | Sockets | Contact Us
© Copyright GA Fixings 2006